> For the complete documentation index, see [llms.txt](https://docs.talordata.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.talordata.com/proxy/integrations/use-talordata-proxies-with-ixbrowser.md).

# Use Talordata Proxies with IXBrowser

IXBrowser is an anti-detection fingerprint browser that allows you to bind an independent proxy IP to each browser profile. Combined with browser fingerprinting isolation technology, it effectively prevents multi-account association. Follow the steps below to complete the proxy setup.

{% hint style="success" icon="lightbulb-exclamation-on" %}
Before configuring the proxy, you need to obtain proxies credentials. [Click here](/proxy/rotating-residential-proxies/rotating-residential-proxies-quick-start.md) to learn how to obtain proxies credentials.
{% endhint %}

***

{% stepper %}
{% step %}

### **Download IXBrowser**

1. Visit the [IXBrowser website](https://ixbrowser.com/) to download the version suitable for your operating system.
2. After installation, launch the software and register or log in.

{% endstep %}

{% step %}

### **Create a Browser Profile**

1. In the browser window list, click **Create Profile**.
2.  Select the platform you need to access and enter a window name (customizable).

<figure><img src="/files/eLVhPFF9XKLsoDd8CSJT" alt="" width="563"><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### **Configure the Proxy**

Click **Proxy Configuration** → **Custom**, select the proxy type (HTTP/HTTPS/SOCKS5), and enter the following information:

* Proxy address: Enter the proxy host.
* Port: Enter the proxy port.
* Username: Enter your proxy username.
* Password: Enter your proxy password.

<figure><img src="/files/famaHUNRtwAVnRjGdFiW" alt="" width="563"><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### **Verify the Proxy**

1. Click the **Proxy Detection** button to confirm the connection is working.
2. If verification fails, please check if the proxy information is correct or try switching the protocol.

<figure><img src="/files/6wu72Nm7sdqImhV49csZ" alt="" width="563"><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### **Save and Launch**

1. Click the **Create** button at the bottom to save the settings.
2. Click **Open** to launch the browser environment.
3. In the opened browser, visit [ipinfo.io](https://ipinfo.io/) to confirm that the IP address matches the proxy settings.

<figure><img src="/files/x8RJ4JZw32CzjD6x3r7n" alt="" width="563"><figcaption></figcaption></figure>
{% endstep %}
{% endstepper %}

***