> For the complete documentation index, see [llms.txt](https://docs.talordata.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.talordata.com/proxy/integrations/use-talordata-proxies-with-morelogin.md).

# Use Talordata Proxies with MoreLogin

Configuring proxies in the MoreLogin fingerprint browser can assign a dedicated IP to each browser environment, enabling secure isolation for multi-account management. Please follow the steps below to complete the proxy setup.

{% hint style="success" icon="lightbulb-exclamation-on" %}
Before configuring the proxy, you need to obtain proxies credentials. [Click here](/proxy/rotating-residential-proxies/rotating-residential-proxies-quick-start.md) to learn how to obtain proxies credentials.
{% endhint %}

***

{% stepper %}
{% step %}

#### **Download and Log in**

1. Go to the [MoreLogin official website](https://www.morelogin.com/) to download the client
2. After installation, launch it and log in.
   {% endstep %}

{% step %}

#### **Create a Profile**

After logging in, on the profiles page, click the **New** **Profile** button.

<figure><img src="/files/chzlIFykZaMtwPn4M6XB" alt="" width="563"><figcaption></figcaption></figure>
{% endstep %}

{% step %}

#### **Configure the Proxy**

1. In the proxy settings section, select **Advanced create**
2. Fill in the proxy information:

   * Proxy type: HTTP/HTTPS/SOCKS5
   * Proxy host: Enter your proxy host address
   * Proxy port: Enter the port
   * Proxy username: Enter your username
   * Proxy password: Enter your password

   <figure><img src="/files/jblWho48SvPfPxHl9lKA" alt="" width="563"><figcaption></figcaption></figure>

{% endstep %}

{% step %}

#### **Verify the Proxy**

1. Click the **Test proxy** button to confirm that the proxy connection is working.
2. If verification fails, check if the information is correct or try switching the protocol.

<figure><img src="/files/gUoQGu4xidsXDRVzu089" alt="" width="563"><figcaption></figcaption></figure>
{% endstep %}

{% step %}

#### **Save and Launch**

1. Click the **Save & Start** button at the bottom.
2. In the opened browser, visit [ipinfo.io](https://ipinfo.io/) to confirm that the displayed IP matches the proxy settings.

<figure><img src="/files/FL31vpjI0bMf5ProgcHd" alt="" width="563"><figcaption></figcaption></figure>
{% endstep %}
{% endstepper %}

***