> For the complete documentation index, see [llms.txt](https://docs.talordata.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.talordata.com/proxy/integrations/vmlogin.md).

# VMLogin

{% stepper %}
{% step %}

### **Download** Gologin

1. Visit the [VMLogin website](https://www.vmlogin.us/?ref=talordata) to download the version suitable for your operating system.
2. After installation, launch the software and register or log in.

{% endstep %}

{% step %}

### **Create a Browser Profile**

On the main interface, click Add profile.

<figure><img src="/files/6kYvcQjwjb4uLeo54MZR" alt="" width="563"><figcaption></figcaption></figure>
{% endstep %}

{% step %}

### **Configure the Proxy**

In the proxy settings section, select **Your Proxy** and fill in the following information:

* IP address: Enter the proxy host.
* Port: Enter the proxy port.
* Login: Enter your proxy username.
* Password: Enter your proxy password.

<figure><img src="/files/xG994eCE5KYL48vVIMHi" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### **Verify the Proxy**

1. Click the **Proxy Detection** button to confirm the connection is working.
2. If verification fails, please check if the proxy information is correct or try switching the protocol.

<figure><img src="/files/RGkGAcelIiFITh8OoBZg" alt=""><figcaption></figcaption></figure>

{% endstep %}

{% step %}

### **Save and Launch**

1. Click the **Create** **Profile** button at the bottom to save the settings.
2. Click **Open** to launch the browser environment.
3. In the opened browser, visit [ipinfo.io](https://ipinfo.io/) to confirm that the IP address matches the proxy settings.

<figure><img src="/files/DUlTH8rNaMEQ6geo60m8" alt=""><figcaption></figcaption></figure>
{% endstep %}
{% endstepper %}